Broken nail? No problem. Our Just Flex can be used to repair any nail, find out more in our tutorials.

STEP 1 - Prep carefully (advisable not to shape a split nail, until its stable).

STEP 2 - Basecoat and then cure.

STEP 3 - Remove a small bead from the tube with a wood stick or spatula.

STEP 4 - Apply a small amount of Just Flex on top of the split (and a small parameter around, in case the split widens) or use it to sculpt a nail corner.

STEP 5 - Flatten as thin as possible with a brush or wood stick.

STEP 6 - Cure for 60 seconds.

STEP 7 - Wipe inhibition layer.

STEP 8 - Shape and buff the nail.

STEP 9 - Further base coat can be applied over the Just Flex or you can apply gel polish or builder directly over it, depending on the clients nails.